488 Chapter 66 DHCP Server Settings panelNN40020-603NN40020-603To add a new Included Address Range1 Click Configuration > Data Services >DHCP Server > Address Ranges.2 Click Add beneath the Included Address Ranges table.The Add Included Address Range dialog box appears.3 Enter the appropriate From IP address and To IP address ranges.4 Click OK.The address range is added to the table.To delete an Included Address Range1 Highlight the Address Range you want to delete.2 Click Delete.3 Click Yes on the confirmation dialog box.To add a Reserved Address1 Click Configuration > Data Services >DHCP Server > Address Ranges.2 Click Add beneath the Reserved Address table.The Add Reserved Address dialog box appears.3 Enter the appropriate information in the IP address, MAC address, Client name, and Clientdescription fields. The IP Address and MAC Address are required fields. The Client Name andClient Access are optional fields.4 Click OK.The reserved address is added to the table.To delete a Reserved Address1 Highlight the Reserved Address you want to delete.2 Click Delete.3 Click Yes on the confirmation dialog boxNote: You cannot exclude addresses in an address range. Instead, you can use multipleaddress ranges:1 Create one address range for the IP addresses below the excluded addresses.2 Create a second address range for the IP addresses above the excludedaddresses.For example, to create an address range from 10.10.10.10 to 10.10.10.49, but excludingaddresses from 10.10.10.20 to 10.10.10.29, create one address range from 10.10.10.10 to10.10.10.19 and one address range from 10.10.10.30 to 10.10.10.49.
