12 PrefaceP0604218 02About the buttons on your telephoneThis guide shows the Business Series Terminal buttons. Table 1 shows which buttons to use on thedifferent types of Nortel Networks telephones.You can enter ≤, ƒ or ƒ and the code to use a feature. For example: Press≤·°⁄ to access your mailbox.The T7100 works differently from other telephones on your system because it does not have linebuttons. Where other telephones can require that you select a line button to answer a call, with theT7100 terminal you pick up the handset. Where other telephones require you to select a line buttonto take a call off hold, you press ≥ on the T7100 terminal.On T7100 terminals, you can answer a second call by pressing ˙. Your active call is put onhold and you connect to the waiting call. You can have no more than two active calls at one time.The T7100 terminal does not have a © button.Related publicationsFor more information about programming CallPilot 100/150, refer to the following publications:• CallPilot Manager Set Up and Operation GuideProvides instructions for setting up the CallPilot 100/150 using CallPilot Manager.• CallPilot 100/150 Telephone Administration GuideProvides instructions for setting up the CallPilot 100/150 using a Norstar telephone.• CallPilot Programming RecordProvides a record of the settings used for the CallPilot 100/150.• Nortel Networks Call Center Set Up and Operation GuideProvides instructions for setting up the Call Center features on CallPilot 100/150.• Nortel Networks Call Center Reporting Set Up and Operation GuideProvides instructions for setting up the Call Center Reporting feature on CallPilot 100/150.Table 1 Telephone buttonsButton Name T7100, T7208,T7316, T7316EM7100, M7208,M7310, M7324M7100N, M7208N,M7310N, M7324NFeature ≤ ƒ ƒHold ≥˙≥˙≥˙Volume Control √ √ √Release ® ® ®
