Nortel CallPilot 150 Installation And Maintenance Manual

Also see for CallPilot 100: Installation and Maintenance Administration guide Quick start guide Administration guide User manual

Contents

Nortel CallPilot 150 Installation And Maintenance Manual Manual pdf 58 page image

58 Chapter 9 Upgrading CallPilot 100/150P0604218 026 The CallPilot 100/150 copies the files from the upgrade cartridge to the feature cartridge.During the upgrade, the LEDs turn on and off in the following sequence:• LEDs 1 to 4 cycle on and off, one at a time, for approximately 8 to 10 minutes• LEDs 1 to 4 turn off for approximately 40 seconds• some or all of the LEDs 1 to 4 may light to indicate TCM connections to the CallPiloton these ports7 Wait until the LED turns on.8 Unplug the power connector from the CallPilot 100/150.9 Press the eject button on the top PCMCIA slot to remove the upgrade cartridge.10 Restore power to the CallPilot 100/150.The CallPilot 100/150 will reboot. At this point it begins any necessary conversions.11 If necessary, you can restore your CallPilot information. For information about how to restorethe CallPilot information, refer to “Restoring the CallPilot information” on page 53.Upgrading the message storageMessage storage is the amount of memory available on your CallPilot system to store greetingsand voice mail messages. You can upgrade the message storage on your CallPilot 150 from 24hours to 59 hours.To upgrade the message storage, you replace the existing feature cartridge with the expandedmemory feature cartridge. Contact your Nortel Networks sales representative for information onhow to obtain an expanded memory feature cartridge.To upgrade the message storage:1 Backup your CallPilot information. For information about how to backup CallPilot, refer to“Backing up the CallPilot information” on page 51.2 Put on an anti-static strap and connect it to a grounded metal object.3 Unplug the power connector from the CallPilot 150.4 Press the eject button on the bottom PCMCIA slot to remove the feature cartridge.Note: When removing the upgrade cartridge, be careful not to dislodge the featurecartridge in the bottom slot. If the feature cartridge becomes dislodged, ensure it isfully inserted before you restore power.Note: You cannot upgrade the message storage time on a CallPilot 100.