Nortel CallPilot Series Upgrade Manual

Also see for CallPilot 702t: Installation and configuration guide Installation and configuration

Contents

Nortel CallPilot Series Upgrade Manual Manual pdf 114 page image

114 Chapter 7 Configuring the CallPilot systemb. Specify the IP address and subnet mask for the Nortel serversubnet. (The IP address information is in the following file:D:\Nortel\Data\IPCONFIGURATION.txt)c. Repeat the steps for the ELAN subnet.d. Specify the gateway for the Nortel server subnet.27 Click Next.Result: The Ready to Configure screen appears.28 Click Finish.Result: A dialog box prompts you to confirm the configuration.29 Click OK to configure CallPilot.Result: The configuration is applied to the server. This task cantake from 10 to 40 minutes to complete, depending on the number oflanguages installed and the number of programmed DSP cards. TheConfiguration Wizard displays progress information.After the configuration is applied to the server, a dialog box remindsyou to reboot the server for the configuration to take effect.Congratulations dialog box30 Click OK.Result: The system returns you to the main CallPilot Managerscreen.31 Log off CallPilot Manager and close the Web browser.32 Restart the system.33 Proceed with Chapter 8 "Completing the process" (page 115).—End—Nortel CallPilotUpgrade and Platform Migration GuideNN44200-400 01.12 Standard5.0 24 April 2009Copyright © 2007–2009, Nortel Networks.