Nortel CallPilot Series Upgrade Manual

Also see for CallPilot 702t: Installation and configuration guide Installation and configuration

Contents

Nortel CallPilot Series Upgrade Manual Manual pdf 117 page image

Testing the CallPilot system 117Testing the CallPilot systemPutting the system into operationStep Action1 Log on to Windows Server 2003 using an account with administrativeprivileges.2 Wait until the CallPilot in Full Service dialog box appears.This can take several minutes. Before the CallPilot in Full Servicedialog box appears, you can see the CallPilot Booting or CallPilotNOT in Full Service dialog boxes.During the restart, a CallPilot Not Processing Calls dialog box canappear reporting an error.Error: CallPilot is running but is unable to acceptcalls, since the following services are not fullyoperational: (list). Please check the event log forfurther info.Ignore this message and wait for the CallPilot in Full Service dialogbox that states:CallPilot is running and able to accept calls.3 Log on to the server using CallPilot Manager.4 If channels were courtesy stopped before the upgrade, start them.5 Click System > Service Directory Number, and then verify theservice directory number (SDN) configuration.6 Proceed with "Testing the CallPilot upgrade" (page 117).—End—Testing the CallPilot upgradeFor instructions on testing the CallPilot system operation, refer to theapplicable NTPs:• T1/SMDI and CallPilot Server Configuration (NN44200-303)• Meridian 1 and CallPilot Server Configuration (NN44200-302)• Succession 1000 System and CallPilot Server Configuration(NN44200-501)Proceed with "Returning CallPilot to service" (page 118).Nortel CallPilotUpgrade and Platform Migration GuideNN44200-400 01.12 Standard5.0 24 April 2009Copyright © 2007–2009, Nortel Networks.