Nortel CallPilot Series Upgrade Manual

Also see for CallPilot 702t: Installation and configuration guide Installation and configuration

Contents

Nortel CallPilot Series Upgrade Manual Manual pdf 62 page image

62 Chapter 4 Updating the serverIf your server is UpgradingfromProceed with600r Any release the section "Installing the CallPilot 5.0Image" (page 73)703t Any release the section "Installing the CallPilot 5.0Image" (page 73)1002rp T1/SMDI 2.5 the section "Replacing 1002rp T1/SMDIserver hardware" (page 62)1002rp T1/SMDI 3.0 or later the section "Installing the CallPilot 5.0Image" (page 73)1002rp AML and youare not expanding thenumber of channels orMPUs beyond 962.02 the section "1002rp: Updating the systemBIOS" (page 71)1002rp AML and youare not expanding thenumber of channels orMPUs beyond 963.0 or later the section "Installing the CallPilot 5.0Image" (page 73)1002rp AML and youare expanding thenumber of channels orMPUs beyond 96Any release the section "Expanding the 1002rp AMLsystem" (page 66)1005r Any release the section "Installing the CallPilot 5.0Image" (page 73)Assemble the tools required to install the CallPilot 5.0 Image• #2 Phillips screwdriver (CallPilot 2.5 on 1002rp T1/SMDI or expandingthe 1002rp Meridian 1/CS 1000 system).• 1002rp Server Hardware Installation (NN44200-300).• CallPilot 5.0 Image CDs (2 or 3) or DVD.• Windows 2003 Certificate of Authenticity (COA).Replacing 1002rp T1/SMDI server hardwareIMPORTANT: CallPilot 2.5 systems running on a 1002rp T1/SMDI serverrequire hardware changes. CallPilot 4.0 systems do not require hardwarechanges.Safety precautionsBefore you make any changes to the server hardware, follow these safetyprecautions:• Respect appropriate ESD rules.Nortel CallPilotUpgrade and Platform Migration GuideNN44200-400 01.12 Standard5.0 24 April 2009Copyright © 2007–2009, Nortel Networks.