122 Chapter 10 RAID operations• Ensuring that your system is fully working and the RAID hardware isproperly configured• Performing full data backup• Performing RAID splitting• Performing a CallPilot software upgrade• Performing RAID synching if upgrade successful• Performing RAID synching if upgrade NOT successfulVerifying the RAID firmwareThe minimum requirement for RAID firmware:• firmware: 111UTo verify the RAID firmware versionTo determine what the current RAID firmware version is on the RAID LSIElite 1600 controller, do the following:Step Action1 Turn on the server and press Ctrl+M when prompted during systembootup.Note: The Ctrl+M utility can take up to 1 minute to launch with111U firmware. The system may appear frozen. Do not reset.2 Select Objects menu → Adapter → Other Adapter Information. Ora. Launch the MegaRAID client using: Start → Programs → PowerConsole Plus → Launch Client.b. From the MegaRAID Power Console Plus - Server Selectionwindow, select Access Mode → Full Access to view or changeconfiguration information and click OK.c. From the MegaRAID console, choose Adapter → Properties.3 Review the information on the screen. Ensure that Power ConsolePlus is version 5.00i or later. The LSI Elite 1600 controller firmwareshould be 111U.4 If the firmware is not correct, perform a firmware update. Forinstructions, see "To upgrade or downgrade the RAID firmware"(page 123).—End—Nortel CallPilot703t Server Maintenance and DiagnosticsNN44200-702 01.03 Standard5.0 3 April 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.
