126 Chapter 10 RAID operations13 Press Enter to End the Array.Result: The blinking stops.14 Press F10 to configure the logical drive.15 Press the space bar to select Configuration Array.Result: Span-1 appears in the box opened for the A01 logical drive.16 Press F10 to configure the logical drives.Result: The system prompts you for each of the logical drives toconsecutively select:RAID 1;Size: accept the size displayedAcceptSPAN = NOChange the last value to NOSPAN if required.17 Highlight Accept and press Enter twice to accept these new values.Result: The system prompts you to save the configuration.18 Highlight YES and press Enter.19 Press ESC twice to exit the submenus.20 In the Management menu, choose the Initialize submenu.21 Press F2 to select the logical drive.22 Press F10 and consecutively select YES to initialize the drive pack.23 When the initialization is complete, press any key to return to theManagement menu.24 Press ESC to exit the utility. Save the configuration when prompted.25 Press Ctrl+Alt+Delete as indicated by the menu to reboot.—End—Replacing the LSI1600 card with LSI320-2Use this procedure to replace a failed LSI1600 RAID card.Nortel CallPilot703t Server Maintenance and DiagnosticsNN44200-702 01.03 Standard5.0 3 April 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.