2. Program Change How to Use the Basic Program30 NFS-640 Programming Manual P/N 51333:B 10/03/2003How to Select Special ZonesSelect Special Zones by entering the Special Zone letter and number (for example, F0, R0, and so on)from the Special Function Change screen. The following sections show sample screens that displaywhen you select a Special Zone.F0 (Presignal/PAS) The Presignal screen provides fields for changing the delay time or PAS. Fordetails on Presignal selections, refer to “Presignal and Positive Alarm Sequence (PAS)” on page 80.From the Special Function Change screen, press the F key, then press the 0 key to display the PresignalFunction screen.R0-R9 (Releasing Functions) The Releasing Function screen provides fields for changing releasingfunctions: Delay Timer, Abort Switch, Cross Zone, and Soak Timer. For details on releasingapplications, refer to “Appendix A: Releasing Applications” on page 53. From the Special FunctionChange screen, select a function (R0-R9) to display the Releasing Function screen:F5-F6 (Time Control Functions) The Time Control screen provides fields for changing the starttime, stop time, or days of the week. For details on time selections, refer to “Time Control Zones” onpage 82. From the Special Function Change screen, select F5 or F6 to display the Time Control screen:Continued on the next page...Presignal delay time:60-180 seconds or OFF(no Presignal selected) PAS selection: YES (PAS selected)or NO (PAS not selected)Presignal programming status bannerPresignal(zone F0)PRG PRESIGNAL FUNCT PRESIGNAL DELAYDELAY=180 PAS=NO F00Delay Timer forreleasing application:1-60 seconds or 00(no delay)Releasing Zone programming status bannerAbort Switch: a thee-letter Abort switchType Code (ULI, IRI, NYC, or AHJ) Cross Zone option: specifies type ofCross Zone: N (none), Y, Z, or HSoak Timer option:0000(not used) or delay time(0001-9999 seconds)Releasing zone(R0 shown)PRG RELEASE FUNCT RELEASE CONTROLDELAY=00 ABORT=ULI CROSS=N SOK=0000 R00Time Control programming status bannerTime Control zone(F5 shown)Eighth day-of-week selection (H) thatspecifies when time control settings takeeffect. Press the NEXT or PREVIOUS keyto toggle each selection.ON time: Start Time for Time Controlfunction (in 24-hour time) that mustprecede the OFF time.OFF time: End time for Time Controlfunction (in 24-hour time) that mustbe later than the ON time.PRG TIME FUNCTION TIME CONTROLON=08:00 OFF=12:00 DAYS=SMTWTFSH F05www.PDF-Zoo.com
