2. Program Change How to Use the Basic Program32 NFS-640 Programming Manual P/N 51333:B 10/03/2003How to Change Global System Functions (7=SYSTEM)The System option lets you select settings for global system functions that applyto all programmed devices and zones. For instance, selecting an AlarmVerification Timer for 30 seconds means that all initiating devices selected forAlarm Verification use a 30-second timer. From the “Basic Program” screen,press the 7 key to display the “System Function” screen as shown below:Global System FunctionsSettings for global system functions:Table 11 Settings for Global Systems FunctionsSystem Function Setting DefaultSIL INH (Silence Inhibit Timer) 0 to 300 seconds 000AUTO (Auto Silence Timer) - After the timedelay expires, functions like pressing theSIGNAL SILENCE key, silencing activeoutputs programmed as silenceable.000 (none); 600 to 900 seconds 000VERIFY (Alarm Verification Timer) 0 to 60 seconds* 60USA TIME USA time (mm/dd/yy) orEUR time (dd/mm/yy)Press the NEXT or PREVIOUS key to change.Note that (European) time changes to24-hour time format and date format.USATERM - Allows supervision for devicesconnected to TB12, i.e., LCD-80.N = no supervisionY = supervision enabledNAC_DLY AC delay – delays loss of AC reporting for8 hours.Y=AC delay; N=no AC delayYLocX - One of three operating modes of PC orterminal connected to the control panelthrough TB15 on the CPU-640.Note: For a complete list of functions, refer tothe NFS-640 Operations Manual.LocT -(terminal connected to controlpanel and located in same room).LocM -(same as LocT but requirespassword).RemT -(terminal connected through amodem for Read Status only).LocTBLINK - Addressable SLC device LED blink. Select from 00 to 16.(00 = no blink, 01 = blink every poll, 02 =blink every 2nd poll, 03 = blink every 3rdpoll up to 16 = blink every 16th poll).Note: This setting affects FlashScanmodules only.01ST - The NFPA wiring style used for the SLC. 6=Style 6 SLC wiring4=Style 4 SLC wiring4ACS - Use ACS Selection Groups (Refer to“Annunciator Options” on page 33).N or Y N*This value can not exceed 30 seconds for ULC installations.Program ChangePasswordSIL INH=000 AUTO=000 VERIFY=30 USA TIMETERM=N AC_DLY=Y LocT BLINK=01 ST=4 ACS=Nwww.PDF-Zoo.com
