G3 Series EtherNet/IP Technical ManualPage 63TDG3EPTM1-1EN 05/09Subject to change without noticewww.numatics.com/g3Using the Functionality of the G3 Series EtherNet/IPTM Web ServerThis section will discuss the functionality of the built in Ethernet server. Every Numatics EtherNet/IPTM hasthis feature. Through this server you can configure the node, force I/O, check diagnostics, etc. EachNumatics’ web page will be explained.HomeTo get to the Numatics “Home” page, open a web browser. In the URL line, type in the IP address of themanifold and press “Enter”. The Numatics “Home” page will appear. This page shows a picture of theNumatics EtherNet/IPTM nodes and a manifold. From this page, the user can navigate the entire built-in webserver.The 1st three octets of the IP address of the computer MUST match theIP address of the node.NOTE!
