G3 Series EtherNet/IP Technical ManualPage 65TDG3EPTM1-1EN 05/09Subject to change without noticewww.numatics.com/g3I/O Force and TestThe “I/O Force and Test” window allows the user to test the outputs and inputs of the manifold. A SafetyWarning will appear telling the user to shut off the air supply to the valve manifold. Once the air is shut off, leftclick on “Accept”.The “Force Outputs and View Inputs” window will open. This window lets the user turn on outputs andmonitor the status of inputs that are connected to the manifold. Use the drop box to choose which I/O wordto control/monitor. Output forces can be applied using either the check boxes or “Output Byte DecimalValue”. Left click on “Send I/O data” to force the outputs on/monitor the inputs.
