OperationRanger RP152.4.6 Chain tarePrerequisiteThe tare function CHAIn.tr is activated in the menu.With this function it is possible to tare several times if, for example, cardboard isplaced between individual layers in a container.1. Place the first container or packaging material on the scale and press TARE.The packaging weight is automatically saved as the tare weight, the zero displayand the symbol NET appear.2. Weigh the weighing sample and read/print out the result.3. Place the second container or packaging material on the scale and press TAREagain.The total weight on the scale is saved as the new tare weight. The zero displayappears.4. Weigh the weighing sample in the second container and read/print the result.5. Repeat the last two steps for other containers.2.5 Displaying the capacity availableThe scale has a graphic display of the scale capacity available. The bar indicates howmany per cent of the scale capacity is already occupied and what capacity is stillavailable. In the example, approx. 65 % of the scale capacity is occupied.2.6 Dynamic weighingWith the dynamic weighing function, it is possible to weigh restless weighing samplessuch as live animals. If this function is activated, the symbol appears in the dis-play.With dynamic weighing, the scale calculates the mean value from 56 weighing oper-ations within 4 seconds.With manual start PrerequisiteAVErAGE -> MAnuAL is selected in the menu.The weighing sample must be heavier than 5 scale divisions.1. Place the weighing sample on the scale and wait until it has stabilized.2. Press PRINT to start dynamic weighing.During dynamic weighing, horizontal segments appear in the display, and thedynamic result is then displayed with the symbol *.3. Unload the scale to be able to start a new dynamic weighing operation.