Ranger RP42Settings in the menu4.5.3 RESET – resetting terminal settings to the factory settings4.6 Configuring interfaces (COMMUNICATION)4.6.1 COM1/COM2 -> MODE – operating mode of the serial interfaceSUrE? Confirmation inquiry• Reset terminal settings to the factory settings with Yes• Do not reset the terminal settings with NoPrint Manual data output to the printer with PRINTA.Print Automatic output of stable results to the printer (e. g. for series weighing operations)CONtINU Ongoing output of all weight values via the interfacedIALOG Bi-directional communication via OHAUS or MT-SICS commands, control of thescale via PCCONt.OLd As per CONtINU, see above, but with 2 fixed blanks in front of the unit (compatiblewith Spider 1/2/3)dIAL.OLd As per dIALOG, see above, but with 2 fixed blanks in front of the unit (compatiblewith Spider 1/2/3)dt-b DigiTOL-compatible format.GROSS • Transfer of the gross weight, identified with "G"tArE •Transfer of the tare weightnEt • Transfer of the net weightdt-G As per dt-b, see above, gross weight identified with "G"COnt-Wt TOLEDO Continuous modeCOnt-Ct TOLEDO Continuous mode, transfer of the number of piecesbArc.rd For connecting a serial bar code reader (automatically activates the 5-V voltage sup-ply at Pin 9)2nd.dISP For connecting a second display (automatically activates the 5-V voltage supply atPin 9)rEF Data transfer from the reference scale (automatic switchover)bULK Data transfer from the quantity scale (automatic switchover)AuXILIA Data transfer from the reference or quantity scale (manual switchover)