Ranger RP18Operation2.8 Working with identificationsWeighing series can be assigned 2 identification numbers ID1 and ID2 with up to40 characters that are also printed out on the protocols.If for example a customer number and an article number are assigned, it can beclearly seen on the protocol which article was weighed for which customer.2.8.1 Entering identification1. Enter identification and press ID.IdENt 1 appears in the display.2. If the entered identification is to be saved as ID1, press Yes. If the entered identi-fication is to be saved as ID2, first press No, and then press Yes.The scale returns to weighing mode.2.8.2 Displaying identificationDisplaying ID1: Briefly press ID once.The number currently assigned to the ID1 appears in the display. If no ID1 wasassigned, no Id appears.Displaying ID2: Briefly press ID twice.The number currently assigned to the ID2 appears in the display. If no ID2 wasassigned, no Id appears.2.8.3 Clearing identifications1. Briefly press ID once to display ID1 or briefly press ID twice to display ID2.2. Press C for as long as the identification is displayed.The clearing is briefly confirmed with the message CLEArEd.2.9 Printing resultsIf a printer or computer is connected to the scale, the weighing results can be printedout or sent to a computer.Press PRINT.The display contents are printed out and transferred to the computer. SeeSection 8.4 for sample protocols.