OHAUS Ranger RP Instruction Manual

OperationRanger RP192.10 Displaying infoUp to 13 different values to be displayed can be configured in the menu for the keyInfo.Depending on the configuration in the menu, see Section 4.4.5, the following valuescan be stored in any order (for example):• Net quantity• Gross weight• Average piece weight• Average piece weight, higher resolution• Counting accuracy1. Press Info.The first value is displayed.2. Press Info again.The next value is displayed.3. Repeat as often as necessary until the weight display appears again.Note If Info is not pressed again within 5 seconds , the scale automatically changes to theweight display, even if all information has not yet been queried.2.11 Switching scalesIf a second scale or a weighing platform is connected, e. g. via the optional analogsecond scale interface, the currently active scale is shown in the display.The second scale can be operated in exactly the same way as the first scale.Press Scale Select.The display changes from one scale to the other.