IP Relay operations 6VarioLink 2221/2821/3621 6-36 IP Relay operations6.1 Before transmittingPerform the following operations before using the IP Relay operation. Specifythe following settings to use this machine to send the command for sendinga fax relayed through another machine.Setting “Gateway TX” to “Restrict”Set "Gateway TX" in the Scanner Settings screen (displayed by touching[Admin. 2] - [Network Settings] - [Network Setting1]) to "Restrict".!DetailIf this machine is to be used as a relay machine, set "Gateway TX" to"Allow". For details on using this machine as a relay machine, refer to theUser manual [Facsimile Operations].Incorrect transmissions to unintended recipients can be prevented. Fordetails, refer to "Specifying software switch settings (machine functions)"on page 8-11.Specifying settings for relay stationsSpecify the IP address and domain name of the relay machines. Select relaymachines that are connected to the general telephone line. For details, referto the following pages.To specify the settings from this machine’s control panel, refer to "IP RelaySettings" on page 8-6.To specify the settings from Web Connection, refer to "IP Relay Settings(Administrator mode)" on page 7-29.
