Specifying management settings 8VarioLink 2221/2821/3621 8-38 Specifying management settings8.1 Available parametersParameters that can be specified from the Administrator ManagementscreenThe following Administrator Management parameters are related to theinformation in this manual.2 ReminderIf the [Utility/Counter] key was pressed to register items and specifysettings, be sure to press the [Reset] key in the control panel afterreturning to the initial screen.List of required network settingsThe network settings should be specified as shown below in order for theoperations described in this manual to be used.For details on network settings other than those available on the IP RelaySettings screen, refer to the User manual [Network Scanner Operations].o : Required/ : Available+ : Necessary depending on environment- : Unavailable with the operation!DetailWhen using IP address faxing and IP Relay operations, do not specify asetting for "Self-Domain Name".Parameter DescriptionIP Relay Settings When sending a fax as an IP relay, specify the IP addressand domain name of the relay machines. In addition, themain relay stations to be used can be selected.Software SW Use to specify the machine settings.
