8 Specifying management settings8-26 VarioLink 2221/2821/3621Specifying settings to limit the use of communication modes–1(mode 475)Specify whether to permit or prohibit the use of individual communicationmodes. Prohibited communication modes do not appear in their selectionscreens.2 NoteProgrammed one-touch dial buttons can be used for transmission evenif a prohibited communication mode has been specified.If all communication modes are prohibited (modes 475 to 477), somescreens, such as those for specifying transmission settings, may notnormally be displayed.Settings at time of purchaseSpecifying the settingDuring the production of this unit, the settings in the shaded cells wereselected. The numbers on the right side indicate the page numbers withdescriptions for the corresponding function.Bit 7 6 5 4 3 2 1 0Setting 0 0 0 0 0 0 0 0 (HEX: 00)Bit Description Setting Description Page Refer-ence7 Specifies whether ornot the use ofTCP/IP is prohibit-ed.0 Permitted ----------1 Prohibited6 Specifies whether ornot the use of LPD isprohibited.0 Permitted ----------1 Prohibited5 Specifies whether ornot the use of aRAW port is prohib-ited.0 Permitted ----------1 Prohibited4 Specifies whether ornot the use of SLP isprohibited.0 Permitted ----------1 Prohibited3 Specifies whether ornot the use of aScan to FTP is pro-hibited.0 Permitted ----------1 Prohibited
