8 Specifying management settings8-20 VarioLink 2221/2821/3621Specifying whether transmission source information is added whendirectly faxing, performing an IP relay operation, or forwarding receiveddocuments (mode 352)Specify how transmission source information is added when directly faxing,performing an IP relay operation, or forwarding received documents.Settings at time of purchaseSpecifying the settingDuring the production of this unit, the settings in the shaded cells wereselected.Bit 7 6 5 4 3 2 1 0Setting 1 1 0 1 0 0 0 0 (HEX: D0)Bit Description Setting Description Page Refer-ence7 -------------------------- 1 *Do not change this bitwhen specifying settingsfor this function.----------6 Specifies where trans-mission source infor-mation is added withdirect faxing and IP re-lay operations.0 Outside of the document ----------1 Inside the document5 Specifies whether ornot a transmissionsource information isadded to receiveddocuments that areforwarded.0 Not added ----------1 Added4 Specifies how trans-mission source infor-mation is added whena received documentis forwarded.0 Outside of the document ----------1 Inside the document3, 2, 1, 0 -------------------------- 0000 *Do not change these bitswhen specifying setting forthis function.----------
