Troubleshooting 9VarioLink 2221/2821/3621 9-5IP Scanner operationsError Code Cause RemedyEAXXXX ImageReceiver was not start-ed.Start ImageReceiver.The IP address of the recipientis not specified correctly in thedialog box that appears afterclicking "Receive Settings",then "Connection Filter".Click "Receive Settings", then "Con-nection Filter", specify the correct IPaddress, and then restart ImageRe-ceiver.ImageReceiver is not operat-ing correctly.Restart the computer.Re-install IP Scanner.Check the TCP/IP settings on the com-puter.The LAN cable is not connect-ed.Check that the LAN cable is correctlyconnected.The network settings on thecomputer are not specifiedcorrectly.Check the TCP/IP settings on the com-puter.The network load on the re-cipient’s computer is too high.Check that large e-mail messages arenot being received at the recipient’scomputer and that large files are notbeing downloaded from the Web.Too much data is being sent. If a high scanning resolution has beenspecified, reduce the resolution or de-crease the number of pages scannedat one time, and then scan the docu-ment again.Access is blocked by the set-ting specified for the compu-ter’s firewall (Windowsfirewall) for the Internet con-nection.Change the setting specified for thecomputer’s firewall (Windows firewall)for the Internet connection accordingto the instructions from your networkadministrator.
