3 IP address faxing3-16 VarioLink 2221/2821/36213.4 Specifying additional functionsTouch [Menu] in the screen that appears when the [Fax/Scan] key is pressedto add the following functions.2 NoteIf the optional fax kit has been installed, [Menu] changes to [Fax Menu].* Changes to ( ) if the optional fax kit has been installed.Function DescriptionSetting 1 tab*(Set 1 tab)TSI Select the information, such as this machine’s name, faxnumber or address or the recipient’s name, that is printedat the edge of the page. For details on registering trans-mission source information, refer to the User manual[Network Scanner Operations]. If a recipient’s name is se-lected, the recipient name registered with the one-touchdial button is printed.TX Report Select the conditions for printing the transmission resultsreport.Default: Select this setting to print the report according tothe setting specified from the Administrator Managementscreen.ON: Select this setting to print the report, regardless ofthe transmission result.If TX Fails: Select this setting to print the report only if thetransmission failed.OFF: Select this setting to not print the report, regardlessof the transmission result.2in1 Select whether or not to send the data using the "2in1"function (reducing two pages to fit in a single page).2-Sided TX Select whether or not a double-sided transmission is per-formed. The position of the binding margin and the pageorientation can also be specified.Rotation TX Select whether or not to rotate the scan image accordingto the paper orientation of the receiving machine.This function can be specified when sending an A4-sizeimage with a resolution of 200 dpi or less.Setting 2 tab*(Set 2 tab)Priority TX Select whether or not the data is sent with priority overthe other jobs.Timer TX Setting Specify the time that the fax is to be sent.Stamp Specify whether the scanned image is stamped to indi-cated that it has been scanned. The document must beloaded into the ADF.2 NoteIn order to use the "Stamp" function, optionalstamp unit must be installed.
