Océ cm3522/cm2522 2-31Basic copy operations 22.6 Selecting a Paper SettingThe paper size can be selected automatically according to the original size or it can be specified manually.Specify the paper size according to the corresponding procedure, depending on the desired copy settings.As the factory default, "Auto" is selected.2 NoteIf a setting for special paper is selected for a paper tray, that tray is not selected automatically with the"Auto" Paper setting. (However, a paper tray set to "Single Side Only" is given priority to be selectedwith single-sided printing.) Be sure to specify a paper setting when special paper is loaded into a papertray. For details, refer to "Specifying a setting for special paper" on page 6-15.If the "Auto Paper Select" was selected at the "Auto Zoom" setting, the Zoom screen appears. Touchthe button for the desired zoom ratio.The "Auto" Paper setting cannot be combined with the "Auto" Zoom setting.For details on specifying the priority of paper trays, refer to "Specifying user settings" on page 11-15.2.6.1 Automatically selecting the paper size ("Auto" Paper setting)The size of the loaded original is detected, and copies are produced using paper of the same size.If the "Full Size" Zoom setting was specified, paper of the same size as the original is selected.If the zoom ratio was increased or decreased, a paper size that corresponds to the specified zoom ratio isautomatically selected.1 In the Basic screen, touch [Paper].The Paper screen appears.2 Touch [Auto].3 Touch [OK].
