Océ cm3522/cm2522 2-63Basic copy operations 22.12.2 Separating copies by pages ("Group" Setting)0 As the factory default, "Group" is selected.0 If finisher 9356 is installed, the output tray can be selected. For details, refer to "Selecting the outputtray" on page 2-64.0 If offset sorting is selected while no finisher or separator is installed, printed copies will be fed out andsorted in an alternating w and v pattern if the following conditions are met.8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.Paper of the same size and type is loaded with the w orientation in one paper tray and with the vorientation in another tray.The "Auto" Paper setting is selected.The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.0 If offset sorting is selected while a finisher or a separator is installed, printed copies are fed out andstacked on top of each other with each set shifted to separate it.1 In the Basic screen, touch [Finishing].The Finishing screen appears.2 Touch [Group].– To separate each set of pages, touch [Yes] under "Offset".3 Touch [OK].The Basic screen appears again.
