Océ cm3522/cm2522 1-18Before making copies 1!DetailThe basic settings screen (Basic screen or Quick Copy screen) that appears can be set with the "CopierSettings" parameter in the Custom Display Settings screen (displayed from the User Setting screen).The arrangement of the buttons and screens differ with the Basic screen and Quick Copy screen;however, the functions that can be set are the same. As a default, "Basic" is selected. This manualcontains descriptions of procedures using the Basic screen that appears when "Basic" is selected.The Quick Copy screen displays all of the settings from the Basic screen so that many settings caneasily be specified.!DetailFor details on switching the basic settings screen, refer to "Custom Display Settings" on page 11-17.2 NoteIf settings have been changed from the factory defaults, the tab for the screen containing the changedsettings appears framed with a green line.The green line can be changed to another color with the "Color Selection Settings" parameter in theCustom Display Settings screen (displayed from the User Setting screen in Utility mode).1.1.10 Icons that appear in the screenNo. Item Name Description1 Message display area The status of the machine and details on operations are displayed.2 Functions/settings displayareaTabs and buttons for displaying screens containing various functions are dis-played.Touch a tab or button to display the corresponding screen for specifying thesettings.3 Icon display area Icons indicating the status of jobs and the machine are displayed.4 [Auto Rotate OFF] button Touch to copy with the image not rotated to fit the orientation of the loadedpaper.5 [Separate Scan] button Touch to scan the original in separate batches.An original scanned in different batches can be treated as a single copy job.6 [Finishing] button Touch to specify settings for collating, grouping, stapling, or hole punching.7 Toner supply indicators These indicators show the amount of toner remaining for cyan (C), magenta(M), yellow (Y), and black (K).8 Left panel When the [Job List] button is pressed, a screen showing the jobs currently be-ing performed or waiting to be performed is displayed.When the [Check Job] button is pressed, a screen showing the result of thespecified settings is displayed.9 [Check Job] button The result of the specified settings is displayed.10 [Job List] button Jobs currently being performed or waiting to be performed are displayed.Various commands for checking and managing jobs are available.Icon DescriptionIndicates that data is being sent from the machine, regardless of the current mode.Indicates that data is being received from the machine, regardless of the currentmode.Indicates that an error occurred during an image stabilization operation, a print op-eration or a scan operation.Touch this icon to view a screen containing a warning code.If the warning screen was closed when a warning occurred, touch this button to dis-play the warning screen again.
