Océ cm3522/cm2522 3-12Additional copy operations 33.5 Copying with programmed copy settings (Mode Memory)Programmed copy settings can be recalled to be used again for copying.1 Position the original to be copied.– For details on positioning the original, refer to "Feeding the original" on page 2-6.2 Press the [Mode Memory] key.The Recall Copy Program screen appears.3 Touch the button for the copy program registered with the copy settings to be recalled.– If the copy settings in the selected copy program are not to be checked, continue with step 8.– If the copy program to be recalled is not displayed, touch [↑] and [↓] until the desired copy programis displayed.4 Press the [Check Program Settings] key.– The copy settings cannot be changed from the Check Job Settings screens.
