Océ cm3522/cm2522 10-2Managing jobs 1010 Managing jobs10.1 Overview of Job List screen10.1.1 JobsSpecifying the desired copy settings, then pressing the [Start] key queues the copy operation in this machine.This queued operation is called a job. In the same way, operations for making scans and computer printoutsare also queued as jobs.- Jobs that are being performed and the job log can be checked from the Job List screens.- Jobs are printed starting with the one at the top of the Current Jobs list.- Jobs are numbered in the order that they were programmed and are queued to be performed (printed).2 NoteThe job number identifies the job; it does not indicate the printing order. In addition, the job numberdoes not change until the job is deleted.By using the "Increase Priority" function, the selected job can be moved to the front of the queue sothat it is printed first.10.1.2 Multi-job featureWhile one job is being printed, another job can be queued. A total of 251 jobs can be queued.The number of jobs possible for each operation is listed below.*The values listed above are for reference and may differ from the actual values depending on other settings.When one job is finished being printed, the next queued job automatically begins.2 NoteUp to 251 jobs, including print jobs, scanner transmission jobs, fax transmission jobs and receivedfax/save jobs, can be queued.Operation Number of jobsCopy 5Interrupted copy 1Scan 5TWAIN (Push, Pull) 1Print 10Fax (Quick Memory TX) 1Fax (Memory TX) 50Fax (Timer TX) 20Fax RX 100Fax (Polling RX) 1Fax (Polling TX) 1Sharing 56Total 251
