Océ cm3522/cm2522 2-6Basic copy operations 22.3 Feeding the originalThe original can be fed in either of the following two ways. Be sure to position the original correctly accordingto the type of original being copied.2.3.1 Loading the original into the ADF0 The ADF is an option.0 Do not load originals that are bound together, for example, with paper clips or staples.0 For details on the types of originals that can be loaded into the ADF, refer to "Originals" on page 6-19.0 Do not load more than 100 sheets or so many sheets that the top of the stack is higher than the ▼ mark,otherwise an original misfeed or damage to the original or machine may occur. However, a original thatexceeds 100 pages can be scanned in separate batches. For details, refer to "Scanning the originalin separate batches ("Separate Scan" setting)" on page 2-9.0 If the original is not loaded correctly, it may not be fed in straight or an original misfeed or damage tothe original may occur.0 If the original is loaded in any orientation other than with the top of the original toward the back of themachine, be sure to select the original orientation. For details on selecting the original orientation, referto "Selecting the original orientation (Original Direction settings)" on page 2-21.1 Slide the lateral guides to fit the size of the document.2 Place the original in the original feed tray in the order tobe scanned with the side to be scanned faces up.– Load the original pages so that the top of the originalis toward the back or the right side of the machine.Document Feed Method FeaturesUsing the ADF By using the ADF, a multi-page original can be fed automatically, one page at atime. This feed method can also be used to automatically scan double-sided origi-nals.Using the original glass Place the original directly on the original glass so that it can be scanned. This meth-od is best with books and other originals that cannot be fed through the ADF.AA
