Océ cm3522/cm2522 7-50Application functions 7– To print a sample copy in order to check the print result with the current settings, touch [SampleCopy]. For details about proof copies, refer to "Checking the print result of the Color Adjustsettings (Sample Copy)" on page 7-50.2 NoteEven though the setting can be specified in 1/3-step increments, the setting will appear at the nearestfull increment in the Color Adjustment screen.7.11.2 Checking the print result of the Color Adjust settings (Sample Copy)You can make a sample copy of your original to see how it will appear with the currently specified coloradjustment settings.As an example, the procedure for adjusting the Brightness parameter is described below.!DetailFor details on displaying the screens for the Color Adjust parameters, refer to "Adjusting the copycolor quality (Color Adjust parameters)" on page 7-48.2 NoteWhen the Sample Copy screen is displayed, no key other than [Reset] or [Start] can be used.Place the original on the original glass with the image to be checked positioned within the sample area.The sample copy will be printed even if the edges of the original extend off the original glass.1 In the Brightness screen, touch [Sample Copy].The Sample Copy screen appears.2 Load paper of a size listed under "Paper that can be used" into the paper tray.
