Océ cm3522/cm2522 11-72Utility mode 112 Touch [4 User Authentication/Account Track].The User Authentication/Account Track screen appears.3 Touch [1 General Settings].4 Touch [Public User Access].Buttons for the available settings appear.5 Touch the button for the desired setting.The public user authentication method is set.!Detail[Public User Access] is not available if "User Authentication" is set to "OFF".To log on as a general user when "Public User Access" is set to "On (Without Login)", press the [Access]key to display the Basic screen.11.13.4 User RegistrationThe password, printing permissions, number of prints allowed, and function permissions can be specified foreach user of this machine.In addition, if an authentication unit is installed on this machine, the user’s IC card or the vein patterns of theirfinger can be registered.As an example, the following procedure describes how to register a user with authentication performed bythe machine.0 A total of 1,000 users and accounts can be registered on this machine.0 If "Public User Access" on the General Settings screen is set to "Allow", a public user is added.Function limitations can be specified for the public user.0 If "Account Track" on the General Settings screen is set to "ON", the number of users set for "Numberof User Counters Assigned" can be registered.1 Display the Administrator Settings screen.– For details on displaying the Administrator Settings screen, refer to "Displaying the AdministratorSettings screen" on page 11-35.2 Touch [4 User Authentication/Account Track].The User Authentication/Account Track screen appears.3 Touch [2 User Authentication Settings].The User Authentication Setting screen appears.? Why is [2 User Authentication Settings] not available?% [2 User Authentication Settings] is not available if "User Authentication" on the General Settingsscreen is set to "OFF".4 Touch [2 User Registration].5 Touch the button for the desired user, and then touch [Edit].The Edit screen for the user appears.
