Océ cm3522/cm2522 7-73Application functions 77.18 Copying with the page layout of a booklet ("Booklet" function)The page order of the scanned original is automatically arranged to produce double-sided copies in a pagelayout for center binding, such as for a magazine. Stapling is possible only when optional finisher 9355 isinstalled or optional finisher 9356 is installed with the saddle stitcher attached.!DetailGenerally, a multiple of 4 original pages is required with a single-sided original, and a multiple of 2original pages is required with a double-sided original. If there are not enough pages, blank pages areautomatically added at the end.For details on stapling, refer to "Binding copies at the center ("Center Staple" and "Half-Fold"setting / "Center Staple & Fold" setting)" on page 2-72.For an original that exceeds 100 pages, refer to "Scanning the original in separate batches("Separate Scan" setting)" on page 2-9.The width of the binding margin is automatically specified.1 Position the original to be copied.– For details on positioning the original, refer to "Feeding the original" on page 2-6.2 Touch [Application], and then touch [Booklet].– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes tothe settings are canceled.8877332211REPORT6 36 3548 18 17 REPORT23 66 6451 81 82REPORT7“Left Bind” setting“Right Bind” setting
