7 Specifying Utility mode parameters7-2 cm65207 Specifying Utility mode parameters7.1 Settings that can be specified from Utility modeVarious basic settings and advanced parameters for using this machine can be set from the Utility mode. Thischapter describes the procedures for setting the Utility mode parameters for the User Box functions.Utility mode parametersThe following Utility mode parameters are described in this manual.Web ConnectionWeb Connection is a device management utility supported by the HTTP server integrated into the device.Using a Web browser on a computer connected to the network, machine settings can be specified from WebConnection.Specifying settings with the utility is convenient since text can easily be typed in from your computer insteadof with the machine’s control panel.Since some settings can only be specified with Web Connection, refer to the Web Connection User’s Guidefor details.Parameter Description Page referenceOne-Touch/User BoxRegistrationCreate new user boxes. "Registering user boxes" onpage 7-6Administrator Settings Specify various settings, for example, for deletingdocuments from user boxes."User Box Settings" on page 7-17Specify limitations on the number of user boxes thatcan be registered for each user."Maximum Number of User Boxes"on page 7-15Specify the password for the user box administrator. "User Box Administrator Setting"on page 7-23Perform operations such as formatting the hard diskand deleting data."HDD Setting" on page 7-26
