2 Saving documents2-30 cm65203 Select the density.– To adjust the density, touch [Light] or [Dark].– To select the default setting, touch [Standard].4 Touch [OK], and then touch [OK] in the next screen that appears.Separate ScanThe scan operation can be divided into several sessions for various types of documents, for example, whenall pages of a document cannot be loaded into the ADF, when placing the document on the original glass, orwhen single-sided documents are combined with double-sided documents.Touch [Separate Scan] in the Scan Settings screen. The setting is selected when the button appearsselected.Color (Quality Adjustment)Select whether the document will be scanned in color or black and white.The following four settings are available.Some Color settings may not be available, depending on the selected File Type setting. The possiblecombinations of the Color and File Type settings are shown below.Setting DescriptionAuto Color Select this setting to automatically detect the color of the document and scan it withthe corresponding setting.Full Color Select this setting to scan in full color.Gray Scale Select this setting for documents with many halftones, such as in black-and-whitephotos.Black Select this setting for documents with distinct black and white areas, such as in linedrawings.
