4 Printing a user box document4-10 cm6520– When a Punch setting is selected:6 If finisher 9834 is installed, touch [Fold/Bind].7 Touch [Yes], and then select the desired folding method.8 Touch [OK], and then touch [OK] in the next screen that appears.Adding a binding marginA binding margin can be added to the left or right side or to the top of the printed pages. Settings can bespecified for the following.Parameter DescriptionMargin Position Select the location where the binding margin is to be added. If "Auto" is selected, abinding margin along the long side of the paper is selected if the document length isless than 297 mm. If the document length is more than 297 mm), a binding marginalong the short side of the paper is selected.Adjust Value An area with a width between 0.1 and 20 mm can be specified. To specify a bindingmargin of 0 mm, touch [None].Image Shift When a binding margin is created, the image can be shifted according to the positionof the created binding margin. The image can be shifted between 0.1 and 250 mm left,right, up or down, depending on the position of the binding margin. If the document isto be printed double-sided, touch [Change Back Shift] to also specify the shift on theback side of the pages.
