Specifying Settings From the Control Panel 3im7520/im6020 3-51Specifying Settings From the Control Panel Chapter 3IP FilteringThe IP addresses in the specified ranges can be permitted or denied.IP addresses can connect depending on whether “Enable” or “Disable” hasbeen selected for “Permit Access” and “Deny Access” in the IP Filteringscreen, as shown below.To specify IP Filtering settings1 In TCP/IP Setting screen 5/5, touch [IP Filtering].The IP Filtering > Permit Access screen appears.2 Touch [Enable] or [Disable] under “Permit Access”.Setting IP Address Connection AccessPermit AccessDisableDeny AccessDisableAll IP addresses Connection possiblePermit AccessEnableDeny AccessDisableIP addresses in the specified range Connection possibleIP addresses out of the specified range Connection not possiblePermit AccessDisableDeny AccessEnableIP addresses in the specified range Connection not possibleIP addresses out of the specified range Connection possiblePermit AccessEnableDeny AccessEnableIP address in the range allowed access and outof the range denied accessConnection possibleIP address in the range allowed access and inthe range denied accessConnection not possibleIP address out of the range allowed access andout of the range denied accessConnection not possibleIP address out of the range allowed access andin the range denied accessConnection not possible
