3 Specifying Settings From the Control Panel3-116 im7520/im6020Specifying Settings From the Control Panel Chapter 33.29 LPD SettingsThe use of LPD when printing can be enabled or disabled.To specify LPD settings1 In the Administrator Setting screen, touch [5 Network Setting]. (Refer topage 3-8 for more details.)2 In the Network Setting screen, touch [0 Detail Setting].3 In the Detail Setting screen, touch [7 LPD Setting].The LPD Setting screen appears.4 Touch [Enable] or [Disable].5 Touch [OK].The use of LPD is enabled or disabled.2 NoteTo cancel changes to the setting, touch [Cancel].To quit specifying the Utility mode setting, touch [Exit] in the sub displayarea or press the [Utility/Counter] key. Otherwise, cancel the Utility modeby touching [Close] in each screen until the screen for the Copy, Fax,Scan or Box mode appears.