4 Specifying Settings Using Web Connection4-104 im7520/im6020Specifying Settings Using Web Connection Chapter 44.33 TCP Socket SettingYou can specify TCP socket settings.The settings that can be specified are described below.2 ReminderWhen changing the TCP socket settings, be sure to turn the power of thismachine off, then on again.When turning the main power switch to “OFF”, then to “ON”, wait 10 sec-onds or more before turning the switch to “ON” again; otherwise, this ma-chine may not function normally.2 ReminderThe setting of [Use SSL/TLS] and [Port No. (SSL/TLS)] is available onlywhen the SSL/TLS setting is valid.Setting the TCP Socket to [OFF] may result in the use of some applica-tions on the computer unavailable.Item DescriptionTCP Socket Specify whether to use a TCP socket.Port No. Enter the port number (input range: 1 to 65535).Use SSL/TLS Select to use SSL/TLS.Port No. (SSL/TLS) Enter the port number for SSL/TLS (input range: 1 to 65535).TCP Socket (ASCII Mode) Specify whether to use a TCP socket in the ASCII mode.Port No. (ASCII Mode) Enter the port number (input range: 1 to 65535).
