Specifying Settings From the Control Panel 3im7520/im6020 3-139Specifying Settings From the Control Panel Chapter 3!DetailWhen “Active Directory” is selected under “External Server Authentica-tion”, specify a password with one character or more. If a password is notspecified, authentication will fail.Do not use “ ” ”and “+” in the external server password. For details on theoperating conditions of an external server, ask the network administrator.If “Password Rules” is enabled, a password with less than 8 characterscannot be registered. For details on the password rules, refer to User’sGuide [Copy Operations].To perform user authentication by using an external server, touch [ON(External Server)], and then specify the server type. Up to 20 servers canbe registered in “Active Directory”.When “Active Directory” is specified, [Domain Name] is displayed in theUser Authentication screen and you can log in by selecting a server fromthe servers registered in “Active Directory”.To specify the external server authentication settings1 Display the Administrator Setting screen.2 In TCP/IP Setting screen 2/5 from the Network Setting screen, specifythe following settings.– IP Address– Subnet Mask– Default Gateway
