3 Specifying Settings From the Control Panel3-104 im7520/im6020Specifying Settings From the Control Panel Chapter 33.25 Status Notification SettingsSettings for notifying the administrator of the machine’s status by e-mail canbe specified. The status notification is sent if the e-mail address is enteredand if any of the notification conditions are selected.Status Notification ParametersThe status notification parameters are as follows:Specify the “Printer Location” that is included in the e-mail text of the statusnotification function in Web Connection. For details, refer to “IPP” onpage 4-70.To specify status notification settings1 In the Administrator Setting screen, touch [5 Network Setting]. (Refer topage 3-8 for more details.)2 In the Network Setting screen, touch [0 Detail Setting].3 In the Detail Setting screen, touch [3 Status Notification Setting].– To quit specifying the Utility mode setting, touch [Exit] in the subdisplay area. Otherwise, cancel the Utility mode by touching [Close]in each screen until the screen for the Copy, Fax, Scan or Box modeappears.– Refer to “E-Mail TX (SMTP) Parameters” on page 3-87 for more de-tails.The Status Notification Setting screen appears.Item DescriptionNotification Address Setting Sets the e-mail address where notification of the machine’sstatus is to be sent. Use the keyboard that appears in thetouch panel to type in the e-mail address (up to 320characters).To register multiple e-mail addresses, separate them with acomma (,).Notification Item Setting Sets the conditions under which notification of the ma-chine’s status is to be sent by email. For details on specify-ing the settings, refer to “Notification Item Setting” onpage 3-105.Notification Time Setting Sets the time when notification of the machine’s status is tobe sent. To change the value, press the [C] (clear) key, andthen use the keypad to type in the value (between 1 and 10minutes).
