3 Specifying Settings From the Control Panel3-136 im7520/im6020Specifying Settings From the Control Panel Chapter 3AuthenticationSpecify whether to use authentication for access from other systems thatuse OpenAPI. (Default setting: OFF)1 In the Administrator Setting screen, touch [9 System Connection]. (Re-fer to page 3-8 for more details.)2 In the System Connection screen, touch [1 OpenAPI Setting].3 In the OpenAPI Setting screen, touch [Authentication].The OpenAPI Setting screen appears.4 Touch the desired key under “Authentication”.– If “ON” is selected, proceed to step 5 and enter the login name andpassword.– If “OFF” is selected, proceed to step 9.5 Touch [Login Name].6 Enter the login name (up to 8 characters), and then touch [OK].The login name is set.7 Touch [Password].
