Specifying Settings From the Control Panel 3im7520/im6020 3-123Specifying Settings From the Control Panel Chapter 33.32 SNMP SettingsSNMP settings can be specified.SNMP ParametersThe SNMP parameters are as follows:The v1/v2c settings that can be specified are described below.Item DescriptionSNMP Setting Specify whether to use SNMP.SNMP v1/v2c(IP) Select whether to use SNMP v1/v2c (IP).SNMP v3(IP) Select whether to use SNMP v3 (IP).SNMP v1(IPX) Select whether to use SNMP v1 (IPX).UDP Port Number Specify the UDP port number. To change the value, pressthe [C] (clear) key, and then use the keypad to type in thevalue (between 1 and 65535).[v1/v2c Setting] Specify when you want to select v1 or v2c. For details onspecifying the setting, refer to “v1/v2c Setting” onpage 3-125.[v3 Setting] Specify when v3 is selected. For details on specifying thesetting, refer to “v3 Setting” on page 3-126.Item DescriptionWrite Setting Specify whether to enable the write setting.Read Community Name Specify the read community name. The default setting is“public”. Use the keyboard that appears in the touch panelto type in the read community name.Write Community Name Specify the write community name. The default setting is“private”. Use the keyboard that appears in the touch panelto type in the write community name.
