Scanning Documents 2im7520/im6020 2-57Scanning Documents Chapter 2Original SettingSpecify the type of document that is loaded, for example, if it contains mixedsizes or is folded in a zigzag.To specify the Original Settings1 Touch [Scan Settings] in the Scan mode screen.2 Touch [Original Setting].Item DescriptionMixed Original Select this setting when documents of different sizes areloaded into the ADF. The scan speed is decreased since thesize of each page is detected before it is scanned.Z-Folded Original Select this setting when the loaded document is folded in azigzag.Original Direction Specifies the orientation of the document. The data isprocessed so that the top and bottom ends are correctlypositioned when the document is scanned.Bind Specifies the binding position for punched holes and staples.This function adjusts the binding position so that it is notreversed when a double-sided document is scanned.Left: A document with a bind on the left side.Top: A document with a bind on the top side.Right: A document with a bind on the right side.Auto: If the length is 11-3/4 in. or less, the binding position isalong the long side of the paper. If the length is more than11-3/4 in., the binding position is along the short side of thepaper.
