8.[Administration] Tab Page[Setup] Item list 1558 [Administration] Tab Page Setting up NetWare SessionIn NetWare Session, you can set the NetWare Bindery or NDS service. This must be set when configuring a Novellprinting environment.12 SMB Signing of SMB Client Select whether SMB Signing is enabled or disabled when this equipment accesses theclients using SMB, such as when this equipment stores the scanned data in the networkfolder using SMB. If server agrees, digital signature is done for the communication. — Select this touse the digital signature to secure the communication to an SMB server only when theSMB Signing of SMB Server that this equipment accesses is enabled. If the SMBSigning of SMB Server is disabled in an SMB server, the communication is performedwithout the digital signature. Digital signature is always done for the communication on the client side. —Select this to make this equipment always access an SMB server with a digitalsignature. When the SMB Signing of SMB Server is disabled in an SMB server, thecommunication is not allowed. Digital signature isn't done for the communication for the client. — Select this tocommunicate to an SMB server without the digital signature. If the SMB Signing of SMBServer is always enabled in an SMB server, the communication is not allowed. If you do not know whether the SMB Signing of SMB Server is enabled or disabled in the SMB servers, it is recommendedto select [If server agrees, digital signature is done for the communication.]. If this is set incorrectly, the SMBcommunication may become unavailable. The digital signature is always done for the communication on the server side as the default on Windows Server 2003/Windows Server 2008. Therefore specify "If server agrees, digital signature is done for the communication." or "Digitalsignature is always done for the communication on the client side." for SMB communications with a Windows Server2003/Windows Server 2008.Item name Description1 Enable NetWare Select whether NetWare is enabled or disabled. Enable — Enables NetWare. Disable — Disables NetWare.2 Enable Bindery Select whether the NetWare Bindery mode for Novell printing is enabled or disabled. Whenyou configure a Novell printing environment with the NetWare server in the bindery mode,you must enable this.3 Enable NDS Select whether the NetWare NDS mode for Novell printing is enabled or disabled. When youconfigure a Novell printing environment with the NetWare server in NDS mode, you mustenable this. When this is enabled, you should also specify the context and tree for the NDS.4 Context Enter the NDS context where the NetWare print server for this equipment is located.5 Tree Enter the NDS tree.6 Preferred File Server Enter the NetWare server name in which this equipment preferentially searches for thequeues.Item name Description123456
