8 [Administration] Tab Page232 [Setup] How to Set and How to Operate Setting up InternetFax settingsYou can configure Internet Fax operations from the [InternetFax] submenu under the [Setup] menu.Some settings may not be reflected on the touch panel immediately after saving them. The settings will be updated bypressing the [FUNCTION CLEAR] button on the control panel or after an Auto Clear time period.Setting the Internet Fax settings1 Start TopAccess access policy mode. P.22 “Access policy mode”2 Click the [Administration] tab.3 Click the [Setup] menu and [InternetFax] submenu.The InternetFax submenu page is displayed.4 In the InternetFax submenu page, set the Internet Fax settings as required.You can set the following in this page. P.197 “Setting up InternetFax Setting”5 Click [Save].The confirmation dialog box appears.When you click [Cancel] before saving the setting changes, they will not be saved and will return to the currentsettings. Note that they will not be returned to the factory default by clicking [Cancel]. This can only clear thechanges and restore the current settings before saving the changes.
