8 [Administration] Tab Page168 [Setup] Item list Setting up LLTD SessionEnable this setting for confirming the device connection status, installing devices or accessing the TopAccess. This settingalso allows you to discover the desired device over the local network and view device information such as location, IPaddress, MAC address or profile on the Network Map under the Windows Vista/Windows 7/Windows Server 2008environment. Setting up Wake Up SettingThis section describes how to set network access during the Super Sleep mode.Use this setting for a case such as when you want to recover this equipment from the Super Sleep mode by searching thisequipment over a network.This setting can be enabled only when [Enable] is selected for the Super Sleep mode setting. If not selected, the WakeUp setting is disabled because this equipment does not enter the Super Sleep mode. P.140 “Setting up Energy Save”Item name Description1 Enable LLTD Select whether the LLTD setting is enabled or disabled. Enable — Enables the LLTD. Disable — Disables the LLTD.2 Device Name Enter a device name to be displayed on the Network Map.You can enter up to 16 characters for the device name.121
