8 [Administration] Tab Page278 [Security] How to Set and How to Operate7 Before enabling SSL, you must input the password for the imported device certificatefrom the control panel of the equipment.For instructions on how to input the password, refer to the following section in the MFP Management Guide.Chapter 2 “SETTING ITEMS (ADMIN)” - “Setting Network Functions” - “Decrypting the user certificate”8 Then you can enable SSL for the following network settings. P.156 “Setting up HTTP Network Service” P.162 “Setting up FTP Server” P.167 “Setting up Web Services Setting” P.204 “Setting up IPP Print” Deleting an imported device certificate1 Start TopAccess access policy mode. P.22 “Access policy mode”2 Click the [Administration] tab.3 Click the [Security] menu and [Certificate Management] submenu.The Certificate Management page is displayed.4 Click [Delete] of [Import] in [Device Certificate].The confirmation dialog box appears.If no device certificate has been imported, you cannot delete it.5 Click [OK].The device certificate is deleted.6 Click [Save] on the [Certificate Management] submenu.
