8 [Administration] Tab Page228 [Setup] How to Set and How to Operate Setting up Save as file settingsYou can configure file saving operations and the Save as File function by the Fax driver from the [Save as file] submenuunder the [Setup] menu.Some settings may not be reflected on the touch panel immediately after saving them. The settings will be updated bypressing the [FUNCTION CLEAR] button on the control panel or after an Auto Clear time period.Setting the Save as file settings1 Start TopAccess access policy mode. P.22 “Access policy mode”2 Click the [Administration] tab.3 Click the [Setup] menu and [Save as file] submenu.The Save as file submenu page is displayed.4 In the Save as file submenu page, set the Save as file settings as required.You can set the following in this page. P.186 “Setting up Local Storage Path” P.187 “Setting up Storage Maintenance” P.187 “Setting up Destination” P.187 “Setting up Folder Name” P.188 “Setting up Format” P.188 “Setting up Single Page Data Saving Directory” P.189 “Setting up File Composition” P.189 “Setting up User Name and Password at User Authentication for Save as File” P.189 “Setting up Searching Interval” P.190 “Setting up Remote 1 and Remote 2” P.193 “Setting up Fax Destination” P.193 “Setting up Fax Folder”
