Windows Utilities- 117 -Useful Software7 Restoring Settings from a File1 Select the machine from the[Registered Device Table].2 Click on the [Device Setting] tab.3 Click on [Menu settings].4 Click .5 Check the details of the displayedmessage and click [Yes].6 Select the file you would like to restoreand click [Open].7 Click . Setting Passwords1 Select the machine from the[Registered Device Table].2 Click on the [Device Setting] tab.3 Click on [Change password].4 Enter the current password and newpassword and click [OK].Alert Info PluginYou can use the Alert Info plug-in to display amessage on your computer when a job finishes.With this software, an "Event" is called when ajob is completed.Note The Alert Info plugin can be used with devices connectedto the network. Set the time and time zone of the machine to those of yourcomputer. Basic SettingsYou can set basic settings of the Alert-Infoplugin.1 Select [Alert Info] from the [Plug-ins]menu.2 Select [Basic settings].3 Change the settings as required.4 Click on [Update]. Device SettingsThe Alert Info plugin settings can be changed foreach device1 Select [Alert Info] from the [Plug-ins]menu.2 Select [Setting devices].3 Click on [Update device].4 Select the device you would like to set.5 Change the settings as required and clickon [OK]. Filter SettingsYou can set display alert conditions for sending orreceiving a fax, printing, or sending andreceiving emails and Internet faxes.1 Select [Alert Info] from the [Plug-ins]menu.2 Select [Filter settings].3 Click on the event button you would liketo set.4 Change the settings as required.5 Click on [OK].Memo Up to 100 senders can be registered as e-mail, Internetfax, or fax sender. Checking LogsYou can check whether there are any recordsregistered for the machine, from the event log.1 Select [Alert Info] from the [Plug-ins]menu.2 Select [Display log].Memo You can check the total number of recorded events in [LogNumber List]. You can see details of recorded logs in [Log details]Network Setting PluginYou can set the network with the ConfigurationTool. Prior to setting, please install the NetworkSetting plugin.Reference For details on how to make network settings, please referto "Changing Network Settings From the Web Page" P. 156. IconThe meaning of each icon is as shown below.Icon DetailsSearches again for themachine.Changes search conditionsfor machine.
