Using Drivers and Software- 40 - Advanced ModeYou can adjust in detail how a document is scanned.1 Follow the procedure for "Starting a ScanJob (for Windows)" P. 39 through step 6.2 Select [Advanced] from [Mode].3 Change the settings if necessary.4 Click [Scan] to start scanning.If you want to finish the setting, click [Quit].Reference For details on how to change each setting, refer to theonline help.Starting a Scan Job (for Mac OS X)(MB441, MB451, MB451w, MB461,MB471, MB471w, MB491, MB491+,ES4161 MFP, ES4191 MFP,MPS4200mb)1 Place your document with text face up inthe ADF or face down on the documentglass.When the device's Scan Mode settings are in"Simple Mode", please proceed to Step 4.Otherwise, please carry out step 2 and 3.2 Press the <SCAN> key.3 Press the to select [Remote PC] andthen press .4 Start Adobe Photoshop CS3 on yourcomputer.5 Select [Import] from [File] and then select[OKI MB4x1_ES41x1_MPS42x USB] or[OKI MB4x1_ES41x1_MPS42x Network].- When [OKI MB4x1_ES41x1_MPS42x USB] isselected, proceed to step 9.- When [OKI MB4x1_ES41x1_MPS42x Network] isselected, the network scan is the second or latertime, proceed to step 9.6 For the first network scan, the dialog boxindicating that the tool for selecting aconnection destination is started isdisplayed. Then, click [OK].7 On the dialog box of [Scan Settings],select a connection destination toregister host information if necessary,and then click [OK].8 Select [Import] from [File] of AdobePhotoshop CS3 and select [OKIMB4x1_ES41x1_MPS42x Network].The windows appears.9 Click the scan button.Scanning starts.10 Select [Quit Photoshop] from[Photoshop].Starting a Scan Job (for Mac OS X)(MB461+LP, MB491+LP,MPS4700mb)1 Place your document with text face up inthe ADF or face down on the documentglass.When the device's Scan Mode settings are in"Simple Mode", please proceed to Step 4.Otherwise, please carry out step 2 and 3.2 Press the <SCAN> key.3 Press the to select [Remote PC] andthen press .4 Start Adobe Photoshop CS3 on yourcomputer.5 Select [Import] from [File] and thenselect [OKI MB4x1+LP_MPS47x USB]or [OKI MB4x1+LP_MPS47xNetwork].- When [OKI MB4x1+LP_MPS47x USB] isselected, proceed to step 9.- When [OKI MB4x1+LP_MPS47x Network] isselected, the network scan is the second or latertime, proceed to step 9.6 For the first network scan, the dialog boxindicating that the tool for selecting aconnection destination is started isdisplayed. Then, click [OK].7 On the dialog box of [Scan Settings],select a connection destination toregister host information if necessary,and then click [OK].8 Select [Import] from [File] of AdobePhotoshop CS3 and select [OKIMB4x1+LP_MPS47x Network].The windows appears.9 Click the scan button.Scanning starts.OKOK
