Advanced Operations for Scanning, Internet Faxing and Scanning to Fax Server- 38 -Setting the Compression LevelYou can specify the appropriate compressionlevel.1 On the [Scan Menu] screen, select thescan mode you want and then press .If you select [USB Memory], go to step 3.2 Press the to select [Scan Setting]and then press .3 Press the to select the [CompressionRate] and then press .If you use the Internet fax function, go to step 5.4 Press the to select the color type(Color, Mono etc.) and then press .5 Press the to select the compressionlevel from [High], [Medium] or [Low]and then press .Memo If you select [Mono (Binary)], you can select acompression level from [High], [Medium] or [Raw].Setting the GrayscaleWhen Grayscale is enabled, data scanned byis not black-and-white (binary) butgrayscale (255 tones).Note This function is only for scanning. Internet FAX and Scanto Fax Server cannot be used.1 On the [Scan Menu] screen, select thescan mode you want and then press .If you select [USB Memory], go to step 3.2 Press the to select [Scan Setting]and then press .3 Press the to select the [Grayscale]and then press .4 Press the to select [ON] and thenpress .OKOKOKOKOKMONOOKOKOKOK
